Bridge and Highway

Tappan Zee Bridge

Location: Nyack, NY and Tarrytown, NY.

Owner: New York State Highway Authority.

This $4 billion dollar project is to design and build a new 3.1 mile bridge that connects Rockland County to Westchester County over the Hudson River. This is the largest bridge construction project in New York's history.

Selco Scope

  • Pier Cap Transverse Walkways. Fully assembled in 20 plus foot modules. Total length range from 60-85 feet each walkway. Approximately 10,000 Square Feet.
  • Mechanical Steel Bracket (2500) needed to support the main line longitudinal run of the fire standpipe and the compressed airline systems for the approach spans. All brackets are shipped assembled with all the connection plates and/or hardware.


Ben Franklin Bridge

Location: Camden, NJ and Philadelphia, PA.

Owner: Delaware River Port Authority

The work to be completed under this $150 million dollar contract consists of a complete replacement of the existing PATCO track, maintenance walkways, railings, structural repairs and bridge chambers.

Selco Scope

  • Replaced existing bridge chambers (36) with new fabricated stainless steel chambers up to 9' X 10' X 8'. The chambers included all the structural steel support framing.
  • Impedance bond walkways
  • Walkway supports
  • Fixation channels
  • All 3rd Rail Transit track material including 3rd Rail coverboards, brackets, insulators and expansion material and hardware.


Willis Ave Bridge

Willis Ave Bridge

Location: New York City

Owner: New York City DOT

$600 million dollar contract to replace the existing bridge with a new swing bridge.

Selco Scope

  • Furnished two rail bridge railing
  • Fabricated picket fencing for the bridge, ramps and walkways 6,000ft.
  • Stainless steel handrail 1,300ft.


Brooklyn Bridge Rehabilitation

Location: Brooklyn, NY

Owner: New York City DOT

Brooklyn Bridge is the oldest suspension bridge in the nation still in operation. This current $508 million dollar round of construction is to do a complete rehabilitation of the approach spans and ramps on both the Manhattan and Brooklyn sides.

Selco Scope

  • All Ornamental Railings
  • Fabricated all of the picket fencing
  • Permanent steel traffic barriers


Manhattan Bridge Rehabilitation

Manhattan Bridge Rehabilitation

Location: New York City

Owner: New York City DOT.

$920 million dollar rehabilitation project to reconstruct the North and South upper roadways, installation of a truss stiffening system (to reduce twisting), reconstruction of the South walkway, a new North bikeway and the replacement of the lower roadway.

Selco Scope

  • Bridge railing on the North bicycle path. We used a riveted construction fabrication technique on the fencing for the railing to replicate its original décor.
  • All stringers and diaphragms on the North bicycle path. Selco supplied approximately 1.6 million Lbs of fabricated steel.
  • Fabricated all of the steel buckle plates.


Contact Us




News

LaGuardia Airport Cooling Tower

Selco Manufacturing Corp., has been contracted to fabricate the Interim Cooling Tower as well as the Final Cooling Tower at the New LaGuardia Airport

NEMA 6P

Selco Manufacturing Corp., is now U.L. Listed for all Custom NEMA 6P Boxes.

Goethals Bridge Replacement Project

Selco Manufacturing Corp., has been awarded over 7500 Feet of Tube Railing for the Main Span as well as the Electrical Expansion Devices for multiple piers and the Cast Iron Barrier Boxes.

Portageville Bridge Project

Selco Manufacturing Corp., has partnered with American Bridge Company on the Portageville Bridge Project in Portageville, NY. We will be fabricating 2000 Feet of Aluminum Railing.