Transit / Rail Lines and Structures

New Haven Line Catenary Replacement Project

Location: Green Farms/ Bridgeport CT.

Owner: Connecticut DOT

$90 million dollar catenary replacement project. Fabricated more than 2 million Lbs of new catenary steel over 11 miles from Green Farms to Bridgeport CT on the New Haven Line

Selco Scope

  • Fabricated all new catenary structures
  • Overhead steel trusses
  • Drop tubes and cross arms
  • Pole extensions
  • Balance weights
  • Guy anchor steel


Staircases and Handrails for Belmont Station

Location: Elmont, NY

Owner: LIRR

Replace existing Staircases and Handrails

Selco Scope

  • Four double sets of anodized aluminum stairs, 50 linear feet each. Included platforms, aluminum railings and stainless steel handrail.
  • Steel support columns with a 3 coat paint system.
  • Four sets of platform to grade stairs.
  • Anodized aluminum ADA ramp railing with stainless steel handrail. (110 feet)
  • Anodized aluminum platform railing. (280 feet)


Fabrication of Security Bollards

Location: Newark Liberty International Airport

Owner: Port Authority of NY & NJ

This project was to improve the safety and security at Newark Liberty International Airport. The bollards would prevent the possibility of any type of vehicle to be driven directly into the terminal.

Selco Scope

Fabricated all of the security bollards on all three levels in both Terminal A and Terminal C.

  • Fabricated approximately 1,200 steel bollards with architectural stainless steel covers and caps for both terminals (3600 FT).
  • Bollard plate assemblies supplied in up to 25 foot fully assembled sections.
  • Guard Rails
  • Grip plates


Wissahickon Station

 

Location: Wissahickon, PA

Owner: SEPTA

Selco Scope:

  • Steel Passenger Shelter
  • Steel Bike Shelter


Hillside Station Stair Replacement

Location: Hollis, NY

Owner: LIRR

Selco Scope

  • Two replacement stairs at LIRR Hillside Station.
  • Anodized aluminum stairs with landings and galvanized painted structural steel columns.
  • Continuous stainless steel handrail on the stairs, and stainless steel safety railing on the platforms.
  • Delivered fully assembled in two pieces.


Wayne Junction Train Station

Location: Philadelphia, Pa.

Owner: SEPTA

A $15 million renovation, work included new platforms, elevators and canopies.

Station fully ADA Compliant

Selco Scope

Our fabrication included

  • New Elevator Structure
  • Windrim Avenue Entrance - Accessible Pathway
  • Windrim Avenue Outbound Canopy
  • Windrim Avenue Tunnel
  • Windrim Avenue Access Canopy
  • Wayne Avenue Entrance Canopy
  • Wayne Avenue Outbound Canopy
  • Germantown Avenue Entrance Canopy
  • Germantown Avenue Skylight Canopy
  • Germantown Avenue Outbound Canopy
  • Station Building West Canopy




Section B Catenary Project

Location: Norwalk/Darien/Stamford CT

Owner: Connecticut DOT

$48 million dollar catenary replacement project

Selco Scope

  • New catenary structures
  • Overhead steel trusses
  • Drop tubes and cross arms
  • Pole extensions


Broad Street Station

Location: Newark, New Jersey

Owner: New Jersey Transit

Selco Scope

  • Catenary steel
  • Poles
  • Overhead trusses
  • Caged ladders
  • Drop tubes and cross arms


World Trade Center Transportation Hub

Location: New York City

Owner: Port Authority of NY & NJ

$4 billion dollar project to build a new transportation hub as part of the new World Trade Center

Selco Scope

  • Fabricated all of the steel bracing for the mini piles on the transportation hub, over 7 million Lbs of fabricated steel


Greenwich Catenary Project

Location: Greenwich CT

Owner: Connecticut DOT

$37 million dollar catenary replacement project.

Selco Scope

  • New catenary structures
  • Overhead steel trusses
  • Drop tubes and cross arms
  • Pole extensions


Bayshore Overpass Pedestrian Bridge

Bay Shore Overpass Pedestrian Bridge

Location: Long Island, New York

Owner: LIRR

The construction of a new pedestrian bridge at the Bay Shore Station in Long Island, NY.

Selco Scope- Project was delivered in three fully assembled sections to avoid station delays.

  • Fabricated the structural support frames
  • Pedestrian bridge and staircases
  • Stainless steel railings
  • Roofing
  • Enclosed stairways, including glass panels and perforated screening
  • Fiberglass stair treads and platforms


Bay Street Train Station

Bay Street Train Station

Location: Montclair, New Jersey

Owner: New Jersey Transit.

$26 million dollar project to rebuild the entire station. This station offers direct service to New York's Penn Station.

Selco Scope

  • Steel canopies
  • Staircases
  • Pedestrian overpass structure
  • Steel platforms
  • Elevator framing steel


Fort Washington Train Station Improvements

Fort Washington Train Station Improvements

Location: Fort Washington, PA

Owner: SEPTA

Selco Scope

The station is located in Fort Washington PA. This project was a full rehabilitation of the entire station.

  • Guard rail
  • Railing panels
  • Station framing which included glass panels
  • Roof and associated framing steel


North Wales Station

North Wales Station

Location: Philadelphia, PA

Owner: SEPTA

Selco Scope

  • Passenger shelters


Contact Us




News

LaGuardia Airport Cooling Tower

Selco Manufacturing Corp., has been contracted to fabricate the Interim Cooling Tower as well as the Final Cooling Tower at the New LaGuardia Airport

NEMA 6P

Selco Manufacturing Corp., is now U.L. Listed for all Custom NEMA 6P Boxes.

Goethals Bridge Replacement Project

Selco Manufacturing Corp., has been awarded over 7500 Feet of Tube Railing for the Main Span as well as the Electrical Expansion Devices for multiple piers and the Cast Iron Barrier Boxes.

Portageville Bridge Project

Selco Manufacturing Corp., has partnered with American Bridge Company on the Portageville Bridge Project in Portageville, NY. We will be fabricating 2000 Feet of Aluminum Railing.